Introducing aspectLED's Dotless™ Linear Dynamic Variable White Color Tuning LED Strip Lights. This continuous LED strip is the perfect solution for a wide variety of applications, especially for those installations where you don't want to see the individual diodes. Requiring no diffusing lens makes the L-Series installation even easier. Our L-Series Dotless LED strip lights are made with wire leads on both ends of each 16.4' reel and can be cut every 1.63", allowing you to cut pieces to the exact length that you need.
- 548 Lumens/Foot
- 5.8 Watts/Foot
|Dimensions||1/2" (12mm) wide x 1/16" (2mm) thick x 16.4' (5M) long||9/16" (14mm) wide x 3/16" (4mm) thick x 16.4' (5M)|
|Cut Length||24VDC: 1.63" (41.47mm)||24VDC: 1.63" (41.47mm)|
|IP Rating||IP20 Indoor Use
|Adhesive Backing||Yes / 3M Adhesive||Yes / 3M Adhesive|
|Mounting Method||Adhesive Backing||Adhesive Backing|
|Beam Angle||120 Degrees||120 Degrees|
|Max Power Consumption||24VDC: 5.8 Watts per foot||24VDC: 5.8 Watts per foot|
|Max Luminous Flux||24VDC: 548 Lumens per foot||24VDC: 548 Lumens per foot|
|Max Run||16.4 feet @ 24VDC||16.4 feet @ 24VDC|
|Weight||0.4 lbs per reel||0.7 lbs per reel|
|Estimated Lifespan||50,000 hours||50,000 hours|
|Warranty||3 Year||3 Year|
|Suitable Uses||Dry Location Only||Dry, Damp Locations|
|Standards / Certifications||UL Listed, RoHS||UL Listed, RoHS|
- Maintenance free
- Solid-state construction makes for high shock and vibration resistance
- Our newest continuous Dotless™ LEDs are super bright, high intensity and low power consumption
- Extremely long life: up to 50,000 hours with very low time-luminosity decay
- No RF interference
- Architectural lighting for canopies, corridors, archways, windows
- Marine and Yacht Lighting
- Downlighting or uplighting for wall wash applications
- Backlighting or edge lighting for signage
- Edge-lighting for glass
- Under-cabinet, toe-kick, in-cove moldings
- DIY projects
- Safety stair tread and step marking
- Decorative lighting for holidays, tradeshows, exhibitions
How long is the lead length on a normal strip light?
Every strip light is made with 6" wire leads on both ends of the 16.4' reel of lights. This allows you to cut the strip light anywhere and utilize both ends for your project.
Do I need Waterproof, Water Resistant or Non-Waterproof?
To select the right LED strip light, consider your application. If it is going to be used outdoors where it will be exposed to rain, humidity or moisture go with the Waterproof. The Waterproof strip lights are completely encased in silicone and can be submersed under water. They are also more resilient to heavy traffic or abuse because of this protection layer. If it will be used indoors near a sink or in a location where it might occasionally get splashed, or under a covered roof outdoors where it will be protected from most moisture, go with Water Resistant. If you are using it indoors and there is no chance of direct water or moisture exposure, the Non-Waterproof will be your best bet.
What lengths are available? What if I need longer than 16.4'?
All of our strip lights are manufactured to 16.4' (5 Meters) but they can be daisy chained together. For high volume, special orders can be made custom to length. Call or chat for more information. For specific questions about your application, feel free to chat with one of our LED lighting experts.
Can I connect multiple strip lights together?
Yes, you can but the distance you can run will depend on the voltage you select. If you plan to run more than 16 feet select 24VDC strip lights and you can run up to 32 feet or 2 full reels daisy chained together. If you plan to cut your strip lights and are looking for pre-made connectors to avoid soldering, check out our Strip Light Connectors and make your install easier.
How do I connect my strip lights to the power supply?
On the strip light, there are two wires; a red wire and a black wire. The red wire is the line(+) wire and the black wire is the neutral(-) wire. Your power supply will also have a line(+) and neutral(-) wire. Connect the corresponding wires together using standard wire nuts or splice/crimp connectors.
What gauge wire should I use to run between my strip light and my power supply?
This depends on the distance between your strip light and the power supply. We generally recommend using between 18ga and 14ga stranded wire. Longer distances require larger gauge wire. Always consult a wire gauge chart to determine the correct size wire for your application.
Which voltage option should I choose?
12VDC: 12 volt strip lights are popular for battery powered applications like automotive, motorcycle, boat/marine applications, or anywhere where you are connecting to a 12VDC supply. Our 12V strip lights also typically have the cut points closer together. Some applications may require a separate 12VDC power supply!
24VDC: Our 24 volt option is the most popular for residential and commercial applications. 24VDC is a safe low voltage, dims the best, usually runs farther without voltage drop issues, and is the most stable and reliable voltage for your aspectLED strip lights. Requires a separate 24VDC supply!