Same-Day Shipping: In-Stock Orders Placed Before 4pm CST.

Toggle Nav
Cart

W-Series RGB Color Changing Flexible LED Strip Light - Standard Bright (9 LEDs/foot)

As low as $44.24
SKU:
AL-SL-W-S-RGB
Availability: In Stock (usually ships same or next business day)

This product requires a power supply.

UL listed RoHS Compliant 3 Year Warranty Dimmable RGB

aspectLED's RGB Color Changing Flexible LED strip lights are a perfect solution for a wide variety of architectural and accent lighting applications including; signage, wall washing, back-lighting, pathway lighting and decorative lighting. Our Standard Bright W-Series RGB flexible LED strip lights are made with wire leads on both ends of each 16.4' reel and can be cut every 4" (12VDC), allowing you to cut pieces to the exact length that you need.

  • 225 Lumens/Foot
  • 2.2 Watts/Foot
  • Cut Length:
    12VDC: 4"
    24VDC: 6-1/2"
  • Run Length:
    12VDC: 16.4’
    24VDC: 32.8’
Non-Waterproof Water Resistant Waterproof
Part # AL-SL-WN-S-RGB AL-SL-WR-S-RGB AL-SL-WW-S-RGB
Dimensions 3/8" (10mm) wide
1/16" (2mm) thick
16.4' (5M) long
3/8" (10mm) wide
1/8" (3mm) thick
16.4' (5M) long
1/2" (12mm) wide
1/4" (5.4mm) thick
16.4' (5M) long
Distance Between LEDs 1-1/16" (27mm) 1-1/16" (27mm) 1-1/16" (27mm)
Cut Length 12VDC: 4" (100.16mm)
24VDC: 6-1/2" (165.1mm)
12VDC: 4" (100.16mm)
24VDC: 6-1/2" (165.1mm)
12VDC: 4" (100.16mm)
24VDC: 6-1/2" (165.1mm)
IP Rating IP20 Indoor Use
Dry Location
IP65 Splash Resistant IP68 Submersible
Adhesive Backing Yes / 3M Adhesive Yes / 3M Adhesive No
Mounting Method Adhesive Backing Adhesive Backing Mounting Straps or Adhesive Caulk
Input Voltage 12VDC or 24VDC 12VDC or 24VDC 12VDC or 24VDC
Beam Angle 120 Degrees 120 Degrees 120 Degrees
Dimmable Yes Yes Yes
Max Power Consumption 2.2 Watts per foot
(7.2 Watts per meter)
2.2 Watts per foot
(7.2 Watts per meter)
2.2 Watts per foot
(7.2 Watts per meter)
Max Luminous Flux 225 Lumens per foot 225 Lumens per foot 225 Lumens per foot
LED Type SMD 5050 RGB LED Chips SMD 5050 RGB LED Chips SMD 5050 RGB LED Chips
LED Quantity 9 LEDs per foot
(150 per reel)
9 LEDs per foot
(150 per reel)
9 LEDs per foot
(150 per reel)
Max Run 16.4 feet @ 12VDC
32.8 feet @ 24VDC
16.4 feet @ 12VDC
32.8 feet @ 24VDC
16.4 feet @ 12VDC
32.8 feet @ 24VDC
Weight 0.4 lbs per reel 0.6 lbs per reel 1.2 lbs per reel
Estimated Lifespan 50,000 hours 50,000 hours 50,000 hours
Warranty 3 Year 3 Year 3 Year
Suitable Uses Dry Location Only Dry or Damp Locations Dry, Damp or Wet Locations
Standards / Certifications UL Listed, RoHS UL Listed, RoHS UL Listed, RoHS
  • Maintenance free
  • Solid-state construction makes for high shock and vibration resistance
  • SMD 5050 LEDs are super bright, high intensity and low power consumption
  • Extremely long life: up to 50,000 hours with very low time-luminosity decay
  • No RF interference
  • Custom flexible PCB board color are available in white, black or yellow (special order)
  • Architectural lighting for canopies, corridors, archways, windows
  • Downlighting or uplighting for wall wash applications
  • Backlighting or edge lighting for signage
  • Edge-lighting for glass
  • Under-cabinet, toe-kick, in-cove moldings
  • DIY projects
  • Safety stair tread and step marking
  • Decorative lighting for holidays, tradeshows, exhibitions

Have a question and don't see the answer below? Chat live with an LED Expert

How long is the lead length on a normal strip light?

Every strip light is made with 6" wire leads on both ends of the 16.4' reel of lights. This allows you to cut the strip light anywhere and utilize both ends for your project.

How many wires are used on an RGB color changing strip light?

RGB Strip lights use 4 wires. One wire for each color Red, Green, Blue and one wire for Black(+) positive.

How do I make my RGB strip light change color?

You will need an RGB controller or a DMX color changing setup to make your RGB strip light change color. For specific questions about your application, feel free to chat with one of our LED lighting experts.

Should I choose Standard Brightness or Ultra Bright?

This is a personal preference and depends on your application. If your application requires a high or more bright lighting or if you are trying to light a larger area, go with Ultra Bright as the light will spread farther and appear brighter. If you are using these as more of an accent light and not a focal point, go with Standard Bright. If you are unsure, go with Ultra Bright and use the dimming function on your controller to allow you to choose your own brightness once installed.

Do I need Waterproof, Water Resistant or Non-Waterproof?

To select the right LED strip light, consider your application. If it is going to be used outdoors where it will be exposed to rain, humidity or moisture go with the Waterproof. The Waterproof strip lights are completely encased in silicone and can be submersed under water. They are also more resilient to heavy traffic or abuse because of this protection layer. If it will be used indoors near a sink or in a location where it might occasionally get splashed, or under a covered roof outdoors where it will be protected from most moisture, go with Water Resistant. If you are using it indoors and there is no chance of direct water or moisture exposure, the Non-Waterproof will be your best bet.

What lengths are available? What if I need longer than 16.4'?

All of our strip lights are manufactured to 16.4' (5 Meters) but they can be daisy chained together. For high volume, special orders can be made custom to length. Call or chat for more information. For specific questions about your application, feel free to chat with one of our LED lighting experts.

Can I connect multiple strip lights together?

Yes, you can but the distance you can run will depend on the voltage you select. If you plan to run more than 16 feet select 24VDC strip lights and you can run up to 32 feet or 2 full reels daisy chained together. If you plan to cut your strip lights and are looking for pre-made connectors to avoid soldering, check out our Strip Light Connectors and make your install easier. Your application may also require signal amplifiers/repeaters depending on the distance you are running from your controller. For specific questions about your application, feel free to chat with one of our LED lighting experts.

How do I connect my strip lights to the power supply?

On the strip light, there are four wires; a red, green and blue wire and a black (+) wire. These wires will screw into the terminals on your controller corresponding to their color. Your power supply will have a line(+) and neutral(-) wire that will also connect to your controller.

What gauge wire should I use to run between my strip light and my power supply?

This depends on the distance between your strip light and the power supply. We generally recommend using between 18ga and 14ga stranded wire. Longer distances require larger gauge wire. Always consult a wire gauge chart to determine the correct size wire for your application and remember that you will need to run 4 wires for RGB Color Changing lights.

Which voltage option should I choose?

12VDC: 12 volt strip lights are popular for battery powered applications like automotive, motorcycle, boat/marine applications, or anywhere where you are connecting to a 12VDC supply. Our 12V strip lights also typically have the cut points closer together. Some applications may require a separate 12VDC power supply!

24VDC: Our 24 volt option is the most popular for residential and commercial applications. 24VDC is a safe low voltage, dims the best, usually runs farther without voltage drop issues, and is the most stable and reliable voltage for your aspectLED strip lights. Requires a separate 24VDC supply!