This connector is designed to work with aspectLED L-Series Dotless™ Linear LED Strip Lights. This connector allows you to cut your strip light to length and splice connect to another piece of the same strip light without soldering. FOR USE ONLY WITH aspectLED L-Series Dotless™ Linear LED Strip Lights.
This is only a splice connector and does not include any wire leads.
Physical Dimensions & Specifications
|Quantity per Pack||1 Connector|
|Max Load||Do not exceed a total combined length of 16.4' (5M) of LED strip lights connected to/through this connector.|
|Suitable Uses||If used outdoors, must be in a NEMA approved weatherproof box.|
- Installer-friendly: easy to install and configure
- Easy to use, just cut your strip at the designated cut line and slide the strip light into the end of the connector and crimp the connector pins onto the solder pads
- aspectLED L-Series Dotless™ Linear LED Strip Lights