Casambi In-Wall Wireless Dimmer Switch Installation Guide
Overview
This guide walks you through the installation and setup of the Casambi In-Wall Wireless Dimmer Switch for use with LED strip lighting. Designed to fit a standard single-gang box, this switch provides seamless wireless control when paired with the Casambi app. Please read all safety instructions carefully before beginning and ensure the Casambi Network is set up prior to installation. If you have questions at any point, our Customer Support team is available to help at support@aspectled.com or 888.503.1317.
- #2 Phillips-head screwdriver
- Electrical Wire: Use the right type and gauge suitable to connect your fixtures.
- Wire stripper
Safety First!
An easy way to remember the essential safety steps is by using the acronym S.A.F.E.T.Y: a quick guide to stay safe and prepared.
S: Shut off power.
A: Ask a licensed electrician if needed.
F: Follow NEC guidelines.
E: Equip yourself with proper PPE.
T: Treat the wires as live.
Y: You are responsible.
Important Safety Instructions
Operating Temperature:
- 0°C to 55°C (32°F to 131°F)
- Suitable for indoor use only
Power Requirements:
This switch requires wired 120VAC power. Use this device with copper or copper clad wire only.
Warning:
Make sure the power is OFF from the electrical panel before starting installation or attempting any maintenance.
Follow Code
For your safety, this device must be wired in accordance to local electrical codes and ordinances. All work should be done by a qualified electrician.
Failure to install and wire device in accordance with the National Electrical Codes (NEC), all applicable Federal, State, and Local electrical codes, as well as specific UL safety standards for the intended working environment (location/application), may cause serious personal injury or property damage. Knowledge and expertise of electrical systems is required for installing this product. When in doubt, contact a certified electrician.
Before installing this product, set up your Casambi Network. If you need assistance, refer to our complete setup guide by visiting our Casambi App Installation Guide.
This product is sized to fit a standard single gang box and requires a wired connection.
Input Power: 120VAC
Power Consumption: 50/60Hz I Max 1.5W
Average Range: 30ft (9.14m)
1. Determine the location
Locate a spot where you’d like the device to be installed. Whether you’re retrofitting into a previous switch setting or constructing a new spot, this switch will fit into a standard single gang box.
2. Wire the system.
Your device will have three connection holes with color coded screws. Match your ground wire to the green screw terminal, your white neutral wire to silver, and your black line wire to the black screw terminal. Be sure all screws are properly tightened before placing in the electrical enclosure.
Use this diagram below as a wiring reference. When in doubt contact a licensed electrician. Use the second poke hole to continue wiring to the next device if needed.
3. Carefully tuck the wires and switch body into the gang box.
4. Using the provided screws, affix the switch to the J-Box, using this diagram as a reference.
5. Complete the install.
Assemble the decorative face plate (not included) over the switch and restore power from the Breaker Box to test the switch.
1. Turn on the switch and make sure it’s ready to be paired.
If the switch double-blinks every 1.5 seconds, it’s functional and hasn’t paired to your network yet.
If the light on the switch is steady, the device is paired and ready to be controlled.
If the switch is blinking on and off in 1 second intervals continuously, this means there is a communication error. If this happens, please give our experts a call and we can help you trouble shoot this issue.
2. Open the Casambi App on your device.
The app will automatically begin to search and find devices that are on and in Bluetooth range.
3. Choose one of the pairing options.
Choose Take all luminaires into use if you’d like to add the switch and any other new/unpaired devices to your default profile network.
Choose Add individually to add luminaires and switches to specific networks that you’ve created.
4. Confirm your additions and test controls.
1. On the Home page, select the ‘More’ tab in the bottom-right corner of the screen.
2. Select the ‘Switches’ section and select the switch you’d like to configure.
3. Once in the menu, tap the ‘Not in Use’ option under Push Buttons and select what setup you’d like to control with the switch.
4. After selecting your lighting configuration, the ‘Push Button’ menu will update. Tap the new option that appears on the menu and select ‘Done’ in the top right of the screen.
5. You’ll be brought back to the ‘Push Button’ menu. Select ‘Done’ one more time to confirm your configurations.
Pro Tip: If you want to control multiple luminaires in a room, add the individual luminaires to a group and pair your switch to your created group. For more information on creating a group, refer to the Casambi App Installation Guide.
6. Test & check your lights.
Once you’ve configured your switch, test your light setup to make sure it’s working properly.
7. That's it: You're all set!
Nice work! You’ve completed the conventional installation process and your Casambi In-Wall Dimmer Switch is ready to go.