Eaton ACCELL Accessory Smart Dimmer for Eaton AAL06 Multi-Location
The Eaton Cooper AND companion/accessory dimmer works with your existing AAL06 master dimmer as a slave dimmer to provide additional benefits over a traditional 3-way dimmer configuration. The ARD dimmer matches perfectly with the AAL06 series units, but as a slave dimmer it only has 2 wires and a ground, allowing you to save installation time. The AAL06 and ARD dimmers also have an LED readout displaying current dimming level. Accurate readout will appear on master and all accessory dimmers. The ARD Accessory Dimmer retains all factory features of the AAL06 including low end trim, high end trim, kick start, and delayed-off capabilities. Please note, this product does nothing by itself and must be used with an existing AAL06 master dimmer. If you only wish to dim in one location, please use the AAL06.
| AL-CTLR-DIMSW-AAL06-C2 | |
|---|---|
| Part # | AL-CTLR-DIMSW-ARD |
| Dimensions | 2.3" Deep 1.75" Wide 4.3" Tall |
| Required Master Dimmer | Cooper-Eaton AAL06 |
| Maximum Wattage | See AAL06 Max Wattage |
| Dimming Types | This dimmer utilizes multi-dimming technology and is compatible with ELV, MLV, and incandescent loads. |
| Pole Type | Multi-Location |
| Compatible Faceplates | Use with many standard toggle faceplate styles, trim plate sold separately. |
| Warranty | 1 Year |
- Installer-friendly: easy to install, mount and configure
- Compatible with many 120VAC aspectLED lights and power supplies
- Residential lighting control
- Commercial/hospitality lighting control
Related Products
