This terminal junction box for low voltage wiring is a safe and attractive way to make wiring connections while keeping them hidden and out of the way. This can be used with class 2 low voltage fixtures and uses a screw terminal for each conductor to ensure your wires are secure. The casing snaps closed so you can rest assured knowing the inside connections will be protected against accidental damage and tampering. This unit is not rated for in-wall use.
|Do not exceed a total combined length of 16.4' (5M) of LED strip lights connected to/through this connector.
|If used outdoors, must be in a NEMA approved weatherproof box.
- Installer-friendly: easy to install and configure
- Easy to use, just insert your stripped wire leads into the splice connector, tighten the screw terminals, put it all into the junction box and snap the lid closed.
- Maximum 14 AWG stranded or solid wire.