W-Series RGBW Color Changing Flexible LED Strip Light - Ultra Bright (18 LEDs/foot)

100% of 100
In Stock (usually ships same or next business day)
As low as $77.73

aspectLED's RGB + White Color Changing Flexible LED strip lights are available in RGB+WW (Warm White 3000K), RGB+NW (Neutral White 4000K) or RGB+DW (Day White 6000K) and are a perfect solution for applications that require a multi-color lighting solution, plus a true white light option. Our Ultra Bright W-Series RGBW flexible LED strip lights are made with wire leads on both ends of each 16.4' reel and can be cut every 6-1/2", allowing you to cut pieces to the length that you need.

Dimmable LED Strip LightsRoHS CompliantUL Listed

Physical Dimensions & Specifications

Non-Waterproof Water Resistant Waterproof
Dimensions 1/2" (12mm) wide
1/16" (2mm) thick
16.4' (5M) long
1/2" (12mm) wide
1/8" (3.3mm) thick
16.4' (5M) long
9/16" (14mm) wide
3/16" (4.7mm) thick
16.4' (5M) long
Distance Between LEDs 1/2" (12mm) 1/2" (12mm) 1/2" (12mm)
Cut Length 6-1/2" (165.1mm) 6-1/2" (165.1mm) 6-1/2" (165.1mm)
IP Rating IP20 Indoor Use
Dry Location
IP65 Splash Resistant IP68 Submersible
Adhesive Backing Yes / 3M Adhesive Yes / 3M Adhesive No
Mounting Method Adhesive Backing Adhesive Backing Mounting Straps or Adhesive Caulk
Input Voltage 24VDC 24VDC 24VDC
Beam Angle 120 Degrees 120 Degrees 120 Degrees
Dimmable Yes Yes Yes
Max Power Consumption 5.5 Watts per foot
(18.04 Watts per meter)
5.5 Watts per foot
(18.04 Watts per meter)
5.5 Watts per foot
(18.04 Watts per meter)
Max Luminous Flux 450 Lumens per foot 450 Lumens per foot 450 Lumens per foot
LED Type SMD 5050 RGB and White LED Chips SMD 5050 RGB and White LED Chips SMD 5050 RGB and White LED Chips
LED Quantity 18 LEDs per foot
(300 per reel)
18 LEDs per foot
(300 per reel)
18 LEDs per foot
(300 per reel)
Max Run 16.4 feet @ 24VDC 16.4 feet @ 24VDC 16.4 feet @ 24VDC
Weight 0.4 lbs per reel 0.6 lbs per reel 1.2 lbs per reel
Estimated Lifespan 50,000 hours 50,000 hours 50,000 hours
Warranty 1 Year 1 Year 1 Year
Suitable Uses Dry Location Only Dry or Damp Locations Dry, Damp or Wet Locations
Standards / Certifications UL Listed, RoHS UL Listed, RoHS UL Listed, RoHS

  • Maintenance free
  • Solid-state construction makes for high shock and vibration resistance
  • SMD 5050 LEDs are super bright, high intensity and low power consumption
  • Extremely long life: up to 50,000 hours with very low time-luminosity decay
  • No RF interference
  • Custom flexible PCB board color are available in white, black or yellow (special order)


  • Architectural lighting for canopies, corridors, archways, windows
  • Downlighting or uplighting for wall wash applications
  • Backlighting or edge lighting for signage
  • Edge-lighting for glass
  • Under-cabinet, toe-kick, in-cove moldings
  • DIY projects
  • Safety stair tread and step marking
  • Decorative lighting for holidays, tradeshows, exhibitions
Note: Luminous flux information applies only to white LEDs. Color LEDs are measured in mcd, rather than lm. Contact a sales representative for assistance.


Have a question and don't see the answer below? Click here to chat with an LED expert.

How long is the lead length on a normal strip light?
Every strip light is made with 6" wire leads on both ends of the 16.4' reel of lights. This allows you to cut the strip light anywhere and utilize both ends for your project.
How many wires are used on an RGBW color changing strip light?
RGBW Strip lights use 5 wires. One wire for each color Red, Green, Blue, White and one wire for Black(+) positive.
How do I make my RGBW strip light change color?
You will need an RGBW controller or a DMX color changing setup to make your RGBW strip light change color. For specific questions about your application, feel free to chat with one of our LED lighting experts.
Should I choose Standard Brightness or Ultra Bright?
This is a personal preference and depends on your application. If your application requires a high or more bright lighting or if you are trying to light a larger area, go with Ultra Bright as the light will spread farther and appear brighter. If you are using these as more of an accent light and not a focal point, go with Standard Bright. If you are unsure, go with Ultra Bright and use the dimming function on your controller to allow you to choose your own brightness once installed.
Do I need Waterproof, Water Resistant or Non-Waterproof?
To select the right LED strip light, consider your application. If it is going to be used outdoors where it will be exposed to rain, humidity or moisture go with the Waterproof. The Waterproof strip lights are completely encased in silicone and can be submersed under water. They are also more resilient to heavy traffic or abuse because of this protection layer. If it will be used indoors near a sink or in a location where it might occasionally get splashed, or under a covered roof outdoors where it will be protected from most moisture, go with Water Resistant. If you are using it indoors and there is no chance of direct water or moisture exposure, the Non-Waterproof will be your best bet.
How do I connect my strip lights to the power supply?
On the strip light, there are five wires; a red, green, blue and white wire and a black (+) wire. These wires will screw into the terminals on your controller corresponding to their color. Your power supply will have a line(+) and neutral(-) wire that will also connect to your controller.
What gauge wire should I use to run between my strip light and my power supply?
This depends on the distance between your strip light and the power supply. We generally recommend using between 18ga and 14ga stranded wire. Longer distances require larger gauge wire. Always consult a wire gauge chart to determine the correct size wire for your application and remember that you will need to run 5 wires for RGBW Color Changing lights.

LED strip lights are a low-voltage (12VDC or 24VDC) product and require a constant source of low voltage power in order to operate. In most residential or commercial applications, a power supply (sometimes called a driver or transformer) is used to provide the LED strip lights with the low voltage power that they need to run. The power supply connects to standard house current (120VAC) and steps this current down to 12 or 24VDC. In automotive or marine applications, this power can be supplied from a 12vdc or 24vdc battery. The most popular voltage used by residential and commercial customers is 24VDC, since it is still a safe low voltage and yet it provides more protection against voltage drop, and consumes less current. If you have any questions about sizing your power supply, please don't hesitate to chat live with an LED expert.

Select the LED strip light that you'd like to use for your calculations. Choosing the right strip light is important because each strip light has a different power consumption (wattage/foot).

Choose your preferred voltage. 24VDC is most common for residential and commercial applications.


Enter the total footage of LEDs that you want to connect to your power supply. Only include the length of your LED strip lights. Don't include the length of any wires.

Calculator Results

Please make your selections above and press calculate.



Simply round *up* to the nearest power supply size. Remember that it never hurts to go larger with your power supply, but your lights will not operate properly if your power supply is too small. If needed, you can also use multiple power suppliesto meet your consumption requirement.
The minimum power supply size automatically adds 20% to your total consumption to account for voltage drop and in-rush current at startup.

View our dimmable power supplies.

View our non-dimmable power supplies.

Need help? Click here to chat live with an LED expert.

Why Choose aspectLED?

aspectLED Contact Center

Exceptional Service

Our LED experts are always here to help! Whether you need assistance designing your lighting plan or installing your products, we're standing by to assist!

aspectLED CNC Machining

Quality Products

High quality LED products are what we're known for. You can rest assured knowing that our manufacturing facilities are inspected quarterly by Underwriters Laboratories (UL).

aspectLED Fair Pricing Handshake

Fair Pricing

Sales and gimmicks aren't part of our business model. We've built our business on offering our best value to every customer, every day.

aspectLED UPS Shipping Dock

Fast Shipping

We stock all of our most popular products and typically ship the same day or next day. For items that we build just for you, our streamlined production process allows us to build your lights in days or weeks, not months.

Want to get in-touch with us?

aspectLED HeadquartersCorporate Headquarters
aspectLED, a Wilson Tool Company
4900 Constellation Drive
Saint Paul, MN 55127 USA

Contact Phone
(888) 503-1317

Chat with an LED expert



Write Your Own Review
You're reviewing:W-Series RGBW Color Changing Flexible LED Strip Light - Ultra Bright (18 LEDs/foot)
Your Rating