N-Series (Narrow) Flexible LED Strip Light - Ultra Bright (36 LEDs/foot)

Physical Dimensions & Specifications

• Maintenance free
• Solid-state construction makes for high shock and vibration resistance
• SMD 3528 LEDs are super bright, high intensity and low power consumption
• Extremely long life: up to 50,000 hours with very low time-luminosity decay
• No RF interference
• Custom flexible PCB board color are available in white, black (special order) or yellow (special order)

Applications:

• Architectural lighting for canopies, corridors, archways, windows
• Downlighting or uplighting for wall wash applications
• Backlighting or edgelighting for signage
• Edge-lighting for glass
• Under-cabinet, toe-kick, in-cove moldings
• DIY projects
• Safety stairtread and step marking
• Decorative lighting for holidays, tradeshows, exhibitions
• Under counter lighting

Installation Guide

Click here to download the installation guide for this product.

Quick Start Wiring Instructions

Click here to download the quick start wiring instructions for this product.

Dimensional/Technical Drawings

Click here to download the technical/dimensional drawings for this product.

Cut Sheet/Specifications

Click here to download the cut sheet/specifications for this product.

IES Files/Other Downloads

Download IES files

FAQ

Have a question and don't see the answer below? Click here to chat with an LED expert.

How long is the lead length on a normal strip light?

Every strip light is made with 6" wire leads on both ends of the 16.4' reel of lights. This allows you to cut the strip light anywhere and utilize both ends for your project.

Should I choose Standard Brightness or Ultra Bright?

This is a personal preference and depends on your application. If you generally like your light levels high or more bright or if you are trying to light a larger area, go with Ultra Bright as the light will spread farther. If you generally like a dimmer light, go with Standard Bright. For example, Standard Bright will still be bright enough to light a counter as under-cabinet lighting and makes a nice accent lighting for cove lighting. However, if you want more of a task lighting at your counters or you want to wash a wall with light, you will likely be happier with Ultra Bright. If you are unsure, go with Ultra Bright and use a dimmer to allow you to choose your own brightness once installed.

Do I need Waterproof, Water Resistant or Non-Waterproof?

To select the right LED strip light, consider your application. If it is going to be used outdoors where it will be exposed to rain, humidity or moisture go with the Waterproof. The Waterproof strip lights are completely encased in silicone and can be submersed under water. They are also more resilient to heavy traffic or abuse because of this protection layer. If it will be used indoors near a sink or in a location where it might occasionally get splashed, or under a covered roof outdoors where it will be protected from most moisture, go with Water Resistant. If you are using it indoors and there is no chance of direct water or moisture exposure, the Non-Waterproof will be your best bet.

What lengths are available? What if I need longer than 16.4'?

All of our strip lights are manufactured to 16.4' (5 Meters) but they can be daisy chained together. For high volume, special orders can be made custom to length. Call or chat for more information. For specific questions about your application, feel free to chat with one of our LED lighting experts.

Can I connect multiple strip lights together?

Yes, you can but the distance you can run will depend on the voltage you select. If you plan to run more than 16 feet select 24VDC strip lights and you can run up to 32 feet or 2 full reels daisy chained together. If you plan to cut your strip lights and are looking for pre-made connectors to avoid soldering, check out our Strip Light Connectors and make your install easier.

How do I connect my strip lights to the power supply?

On the strip light, there are two wires; a red wire and a black wire. The red wire is the line(+) wire and the black wire is the neutral(-) wire. Your power supply will also have a line(+) and neutral(-) wire. Connect the corresponding wires together using standard wire nuts or splice/crimp connectors.

What gauge wire should I use to run between my strip light and my power supply?

This depends on the distance between your strip light and the power supply. We generally recommend using between 18ga and 14ga stranded wire. Longer distances require larger gauge wire. Always consult a wire gauge chart to determine the correct size wire for your application.

LED strip lights are a low-voltage (12VDC or 24VDC) product and require a constant source of low voltage power in order to operate. In most residential or commercial applications, a power supply (sometimes called a driver or transformer) is used to provide the LED strip lights with the low voltage power that they need to run. The power supply connects to standard house current (120VAC) and steps this current down to 12 or 24VDC. In automotive or marine applications, this power can be supplied from a 12vdc or 24vdc battery. The most popular voltage used by residential and commercial customers is 24VDC, since it is still a safe low voltage and yet it provides more protection against voltage drop, and consumes less current. If you have any questions about sizing your power supply, please don't hesitate to chat live with an LED expert.

Calculator Results

Please make your selections above and press calculate.

Total Consumption:   watts

Minimum Power Supply Size:   watts

Simply round *up* to the nearest power supply size. Remember that it never hurts to go larger with your power supply, but your lights will not operate properly if your power supply is too small. If needed, you can also use multiple power suppliesto meet your consumption requirement.
The minimum power supply size automatically adds 20% to your total consumption to account for voltage drop and in-rush current at startup.

View our dimmable power supplies.

View our non-dimmable power supplies.

Need help? Click here to chat live with an LED expert.

Why Choose aspectLED?

Exceptional Service

Our LED experts are always here to help! Whether you need assistance designing your lighting plan or installing your products, we're standing by to assist!

Quality Products

High quality LED products are what we're known for. You can rest assured knowing that our manufacturing facilities are inspected quarterly by Underwriters Laboratories (UL).

Fair Pricing

Sales and gimmicks aren't part of our business model. We've built our business on offering our best value to every customer, every day.

Fast Shipping

We stock all of our most popular products and typically ship the same day or next day. For items that we build just for you, our streamlined production process allows us to build your lights in days or weeks, not months.

Want to get in-touch with us?

Corporate Headquarters & Main Production Facility
aspectLED, Inc.
3735 Dunlap Street North
Arden Hills, MN 55112 USA

Contact Phone
(888) 503-1317

Chat with an LED expert